Train Simulator 2020 Emergency Brake Reset: A Step-by-Step Guide

In Train Simulator 2020, the emergency brake can be a frustrating issue to deal with, especially when it's triggered unexpectedly. However, with this step-by-step guide, you'll learn how to reset the PCS (Power Control System) and get your train moving again.

First, pull the brake back down to 0%. To do this, set the Throttle to -100%, then Reverser to Neutral, and finally, Train Brake to 100%. This will ensure that the train comes to a complete halt before you can reset the PCS. If you don't reset it within a specific amount of time, the TMS (Train Management System) will force the loco into emergency application.

The TMS is an in-cab safety system designed to prevent accidents by cutting off power and stopping the train if necessary. When driving the M36PH locomotive, it's essential to be aware of this system and its functions.

If you're having issues with the emergency brake triggering unexpectedly, there are a few things you can try:

1. Check that all brakes are fully released: Make sure the handbrake, independent brake, and parking brake are all released.

2. Activate the DRA (Dynamic Release Acceleration): This will help to stabilize the train's speed and prevent sudden braking.

3. Press the AWS reset button for 5+ seconds: Sometimes, a missing sound effect or other issue can cause the emergency brake to trigger.

4. Check that the engine is running: Ensure that the engine is operational before trying to move the train.

Additionally, if you're having trouble with the PA system staying active during passenger service, make an announcement between steps 2 and 3 to inform passengers of the delay.

If none of these solutions work, don't hesitate to contact signalman, control, or depot for further assistance. With practice and patience, you'll become more comfortable handling emergency brake situations in Train Simulator 2020.

Train simulator 2020 emergency brake reset